bootcmd=run distro_bootcmd
bootdelay=1
baudrate=115200
ethprime=FEC
ipaddr=192.168.10.2
serverip=192.168.10.1
netmask=255.255.255.0
loadaddr=0x80280000
arch=arm
cpu=armv8
board=apalis-imx8
board_name=apalis-imx8
vendor=toradex
soc=imx8
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
boot_net_usb_start=usb start
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=mmc1 mmc2 mmc0 usb0 dhcp 
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_mmc1=setenv devnum 1; run mmc_boot
bootcmd_mmc2=setenv devnum 2; run mmc_boot
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_usb0=setenv devnum 0; run usb_boot
bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
m4_0_image=m4_0.bin
m4_1_image=m4_1.bin
loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}
loadm4image_1=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_1_image}
m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0
m4boot_1=run loadm4image_1; dcache flush; bootaux ${loadaddr} 1
fdt_addr_r=0x84000000
kernel_addr_r=0x82000000
ramdisk_addr_r=0x86400000
scriptaddr=0x86000000
bootcmd_mfg=select_dt_from_module_version && fastboot 0
script=boot.scr
image=Image
panel=NULL
console=ttyLP1,115200 earlycon=lpuart32,0x5a070000,115200
fdt_addr=0x83000000
fdt_high=
boot_fdt=try
fdtfile=fsl-imx8qm-apalis-v1.1-eval.dtb
initrd_addr=0x83800000
initrd_high=0xffffffffffffffff
kernel_image=Image
mmcdev=0
mmcpart=1
mmcroot=/dev/mmcblk0p2 rootwait rw
hdp_addr=0x84000000
hdp_file=hdmitxfw.bin
loadhdp=fatload mmc ${mmcdev}:${mmcpart} ${hdp_addr} ${hdp_file}
mmcautodetect=yes
mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off
setup=run loadhdp; hdp load ${hdp_addr}; run mmcargs
defargs=pci=nomsi